Light up the night in your garden with these simple DIY solar fence lights!
You will need:
1 Solar landscape light
Snips
Gloves (for protection)
1/2″ Flange
1/2″ Elbow
Clear rubber glue
1″ Screws
Directions:
Step 1: Remove solar light from post
Step 2: Carefully cut 2″ off of the post
Step 3: Coat inside of elbow with glue
Step 4: Coat end of post with glue and insert into elbow
Step 5: Seal opening with rubber glue and allow to dry for 24 hours
Step 6: Spray the post, elbow, and flange with rust preventative paint
Step 7: Secure elbow to flange
Step 8: Use a pen to mark screw holes
Step 9: Remove elbow and secure to fence post
Step 10: Secure elbow and insert light